Swiftech H20 220 APEX ULTRA REV2 Manuel d'utilisateur télécharger pdf (Page 5)

Rouchon Industries, Inc., dba Swiftech – 3700 Industry Avenue, Suite 104, Lakewood, CA 90712 – Toll free (US) 888-857-9438 – Fax 562-595-8769 - E Mail: [email protected]

PAGE 5 of 24

inside your chassis.

 From a performance standpoint there is very little performance to be gained from strictly controlling the component sequence: the

maximum delta T (difference in temperature) between any two points of the liquid cooling circuit does not exceed 1ºC. Whenever

possible, performance oriented users will typically want to route the radiator discharge(s) tube(s) to the inlet of the CPU cooler, since

the fluid exiting the radiators is always the coolest.

Devices:  (1) CPU cooler + (1) Radiator + Pump-reservoir assembly

Connect:  Pump discharge to radiator inlet

 Radiator discharge to CPU cooler inlet

 CPU cooler discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

Alternatively,

Connect  Pump discharge to CPU cooler inlet

 CPU cooler discharge to radiator inlet

 Radiator discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

Devices  (1) CPU cooler + (1) VGA cooler + (1) Radiator + Pump-reservoir assembly

Connect:  Pump discharge to VGA Cooler inlet

 VGA cooler discharge to radiator inlet

 Radiator discharge to CPU cooler inlet

 CPU cooler discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

Alternatively,

Connect:  Pump discharge to CPU cooler inlet

 CPU cooler discharge to VGA cooler inlet

 VGA cooler discharge to radiator inlet

 Radiator discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

Devices:  (1) CPU cooler + (1) VGA Cooler + (1) chipset Cooler + (1) Radiator + Pump-reservoir assembly

Connect:  Pump discharge to chipset cooler inlet

 Chipset cooler discharge to VGA cooler inlet

 VGA cooler discharge to radiator inlet

 Radiator discharge to CPU cooler inlet

 CPU cooler discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

Alternatively,

Connect:  Pump discharge to CPU cooler inlet

 CPU cooler discharge to chipset cooler inlet

 Chipset cooler discharge to VGA cooler inlet

 VGA cooler discharge to radiator inlet

 Radiator discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

Devices:  Dual CPU cooler and VGA cooler (SLI) configurations

Connect:  CPU coolers in series: CPU cooler (1) discharge to CPU cooler (2) inlet

 VGA coolers in series: VGA cooler (1) discharge to VGA cooler (2) inlet

Devices:  Dual Radiators: A second radiator can be added anywhere in the loop in series with the other components,

for example

Connect  Pump discharge to radiator (1) inlet

 Radiator (1) discharge to VGA cooler inlet

 VGA Cooler discharge to chipset cooler inlet

 Chipset cooler discharge to radiator (2) inlet

 Radiator (2) discharge to CPU cooler inlet

 CPU cooler discharge to reservoir inlet

 Reservoir discharge to pump inlet – MANDATORY!

II. Installation of the cooling components

Warning!

Placement of the cooling components may vary depending on your chassis and motherboard configurations. A mock-up

installation is thus necessary to estimate the length of the different sections of tubing that will be required between each component.

The following is the recommended sequence of components installation.

1. Radiator and fan

2. Water-block(s)

3. Pump

4. Reservoir

1 2 3 4 5 6 7 8 9 10 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Swiftech H20 220 APEX ULTRA REV2 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Swiftech H20 220 APEX ULTRA REV2